| GLEASON 104 Straight Bevel Coniflex Generator Serial Number 32793 Rebuilt by Curdworth UK in year 2000. Equipped With: “Coniflex” Helical Motion (2) Digital Read Outs CE Mark Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut) Self-Contained Hydraulic System Coolant Tank & Pump Workhead Brake Chip Conveyor Full Guards Cover Full Compliment of Electrics (Motor/Controls) Specifications: Maximum Workpiece Diameter 9.82″ Maximum Face Width 1.375″ Diametral Pitch 3 Maximum Cone Distance 4.5″ Control Manufacturer Conventional Lower Cutter Spindle: OD: .0001 Face: .0001 Upper Cutter Spindle: OD: .0002 Face: .0001 Work Spindle: Face: .0001 Bore: .0002 Cone Distance: 0 to 4-1/2″ Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min) Extreme Ratio: 10-to-1 Pitch Diameter: 10-to-1 ratio; 8-1/2″ (max) Pitch Diameter: 1-to-1 ratio; 6″ (max) Diametral Pitch (coarsest): 3 DP Diametral Pitch (finest): 20 DP Face Width: 1-3/8″ (max) Index Range: 9 to 93 inclusive, and most numbers up to 175 Pressure Angles: 20, 22-1/2 & 25 deg. Diameter of Taper Hole at Large : 3-29/32″ Taper per Foot: 39/64″ Depth of Taper: 6″ Diameter of Hole Through: 2-7/16″ Spindle Nose to Machine Center: 1-1/2″ to 9″ Cutter Speeds: 98 to 286 (feet per minute) Feeds: 4.2 to 69.2 (seconds per tooth) Main Motor: 5 HP – 480V – 1800 RPM – 60 Hz – 3 PH |