GLEASON 104 Coniflex Straight Bevel Gear Generator

Stock no  3716

GLEASON 104 Straight Bevel Coniflex Gear Generator

New 1960’s  Country of Origin: USA

Serial Number 615810

3 pairs of Cutter Bodies, equipped with completing cam.
(1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

Stock no  3716

GLEASON 104 Straight Bevel Coniflex Gear Generator

New 1960’s  Country of Origin: USA

Serial Number 615810

Equipped with Completing Cam

3 pairs of Cutter Bodies
(1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

SPECIFICATIONS:

Cone Distance:                                        0 to 4-1/2″   ( 0 to 108 mm)
Pitch Angle shafts at 90° :                       84°. 18´ min. (max); 5°. 42´ min. (min)
Extreme Ratio:                                        10-to-1
Pitch Diameter:                                       10-to-1 ratio; 8½” (max) (216 MM)
Pitch Diameter: 1-to-1 ratio;                   6″ (max)  (152 mm)
Diametral Pitch (coarsest):                     3 DP  (8.5 module)
Diametral Pitch (finest):                          20 DP (1.3 module)
Face Width:                                                             1-3/8″ (max) (35 mm)
Index Range:                                                          9 to 93 inclusive, and most numbers up to 175
Pressure Angles:                                     20°, 22½° & 25°.
Diameter of Taper Hole at Large :          3-29/32″ (100 mm)
Taper per Foot:                                       39/64″  (15 mm)
Depth of Taper:                                      6″  (152 mm)
Diameter of Hole Through:                     2-7/16″  (62 mm)
Spindle Nose to Machine Center:            1-1/2″ to 9″  (38 to 229 mm)
Cutter Speeds:                                        98 to 286 (feet per minute)  (30 to 87 m/min)
Feeds:                                                                     4.2 to 69.2 (seconds per tooth) 
Main Motor:                                                            5 HP 1800 rpm

Hydraulic Pump Motor:                           ¾ HP 1800 rpm

Cutting Oil Pump Motor                          ½ HP  3600 rpm

Floor space:                                                            61¼ x 84¼”  (1556 x 2140 mm)

Net Weight                                                             14,500 lbs  (6577 kgs)

Enquiry From

Your Name (required)

Your Email (required)

Subject: Please identify specific machine

Your Message