Serial No.MP 124/13         (1975)

CAPACITY:

Pitch range:- Max……………………                  16 D.P.              1.6 Mod

Min……………………                  1.5 D.P.              17 Mod

Helix angle range……………………                  0 – 45

Work spindle bore……………………                 9.875”                  250 mm

Tailstock to face of work spindle:- Max..       48”                        1219 mm

Standard cutter diameter……………..              6” P.C.D.

Standard cutter bore…………………                3.5”

EXTERNAL GEARS:

Blank diameter:- Max…………………       63”                        1600 mm

Min…………………         0                           0

Face width, double helical……………       0 – 18”                    0 – 457 mm

Face width, spur or single helical…….     0 – 10”                    0 – 254 mm

INTERNAL GEARS:

Blank diameter:- Max…………………       66”                        1676 mm

Face width………………………….                    0 – 8”                     0 – 203 mm

P.C.D.:- Max………………………..                    66”-(2 x rim thickness)

SPEEDS & FEEDS:

Cutting speeds, number……………….     8

Cutting speeds, stroke per min………..    15 – 120

Feeds, number……………………….                 4

Feed range, with 6” cutter……………      0.012” – 0.033”         0.3 – 0.84 mm

MOTORS:

Main motor……………..(2)………..                  10 HP                     7.5 KW

Saddle traverse motor………………..      1 HP                       0.75 KW

Coolant pump motor…………………..     0.75 HP                  0.56 KW

APPROXIMATE WEIGHT…………………..          18,940 kgs              41,740 lbs

Complete with:

Inner & outer cutter heads.

30º left & right-hand helical guides fitted.

2 off  rim steadies.

Tailstock with centre.

4 off Work arbors/work holders

Various change gears.

Various Sykes cutting tools

Coolant pump, reservoir and fittings.

Electrics 220 volt, 3 ph, 50 hz.

METRIC machine.

With operators manual and electrical drawings.